Popis: 1GB 1066MHz DDR3 Non-ECC CL7 SODIMMDetailná špecifikácia: Standard 128M X 64 Non-ECC 1066MHz 204-pin Unbuffered SODIMM (SDRAM-DDR3, 1.5V, CL7, FBGA, Gold)Počet kusov v balení: 1FEATURES:JEDEC standard 1.5V ± 0.075V Power SupplyVDDQ = 1.5V ± 0.075V533MHz fCK for 1066Mb/sec/pin8 independent internal bankProgrammable CAS Latency: 6,7,8,9Posted CASProgrammable Additive Latency: 0, CL - 2, or CL - 1 clockProgrammable CAS Write Latency(CWL) = 7(DDR3-1066)8-bit pre-fetchBurst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4which does not allow seamless read or write [either on the fly using A12 or MRS]Bi-directional Differential Data StrobeInternal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)On Die Termination using ODT pinAverage Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C <, TCASE . 95°CAsynchronous ResetPCB : Height 1.180” (30.00mm), double sided componentPERFORMANCE:CL(IDD) 7 cyclesRow Cycle Time (tRCmin) 50.63ns (min.)Refresh to Active/Refresh Command Time (tRFCmin) 110nsRow Active Time (tRASmin) 37.5ns (min.)Power 1.080 W (operating)UL Rating 94 V - 0Normal Operating Temperature 0o C to 85o CStorage Temperature -55o C to +100o C

Dell: Inspiron 620, Inspiron 620s, Inspiron One 2205, Inspiron One 2305, Inspiron One 2310, Optiplex 380, Optiplex 390, Optiplex 580, Optiplex 780 DT / MT / SFF, Optiplex 780 Ultra Small Form Factor, Optiplex 790, OptiPlex 980, OptiPlex 990 DT / MT / SFF, OptiPlex 990 Ultra Small Form Factor, Precision Workstation T1500, Precision Workstation T1600, Precision Workstation T3500, Studio XPS 7100, Studio XPS 8000, Studio XPS 8100, Studio XPS 9100, Vostro 230 Mini Tower / Slim Tower, Vostro 260, Vostro 260s, Vostro 430, Vostro 460, XPS 430, XPS 730, XPS 730X, XPS 8300 Desktop.

Popis: 2GB 1333MHz DDR3 Non-ECC CL9 SODIMM SR X8 Detailná špecifikácia: Standard 256M X 64 Non-ECC 1333MHz 204-pin Unbuffered SODIMM (DDR3, 1.5V, CL9, FBGA, Gold) Počet kusov v balení: 1

Popis: 2GB 1066MHz DDR3 Non-ECC CL7 SODIMMDetailná špecifikácia: Standard 256M X 64 Non-ECC 1066MHz 204-pin Unbuffered SODIMM (SDRAM-DDR3, 1.5V, CL7, FBGA, Gold)Počet kusov v balení: 1FEATURES:JEDEC standard 1.5V ± 0.075V Power SupplyVDDQ = 1.5V ± 0.075V533MHz fCK for 1066Mb/sec/pin8 independent internal bankProgrammable CAS Latency: 6,7,8,9Posted CASProgrammable Additive Latency: 0, CL - 2, or CL - 1 clockProgrammable CAS Write Latency(CWL) = 7(DDR3-1066)8-bit pre-fetchBurst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4which does not allow seamless read or write [either on the fly using A12 or MRS]Bi-directional Differential Data StrobeInternal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)On Die Termination using ODT pinAverage Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C <, TCASE . 95°CAsynchronous ResetPCB : Height 1.180” (30.00mm), double sided componentPERFORMANCE:CL(IDD) 7 cyclesRow Cycle Time (tRCmin) 50.63ns (min.)Refresh to Active/Refresh Command Time (tRFCmin) 110nsRow Active Time (tRASmin) 37.5ns (min.)Power 1.560 W (operating)UL Rating 94 V - 0Normal Operating Temperature 0o C to 85o CStorage Temperature -55o C to +100o C